This message is resent yet again, don't loose it.
Everyone should get this info when they subscribe, I did. Anyway, good
luck in all of your future endeavors, etc. etc.
You may leave the list at any time by sending a "SIGNOFF DESIGN-L" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]). You can also tell LISTSERV
how you want it to confirm the receipt of messages you send to the list. If you
do not trust the system, send a "SET DESIGN-L REPRO" command and LISTSERV will
send you a copy of your own messages, so that you can see that the message was
distributed and did not get damaged on the way. After a while you may find that
this is getting annoying, especially if your mail program does not tell you
that the message is from you when it informs you that new mail has arrived from
DESIGN-L. If you send a "SET DESIGN-L ACK NOREPRO" command, LISTSERV will mail
you a short acknowledgement instead, which will look different in your mailbox
directory. With most mail programs you will know immediately that this is an
acknowledgement you can read later. Finally, you can turn off acknowledgements
completely with "SET DESIGN-L NOACK NOREPRO".
Following instructions from the list owner, your subscription options have been
set to "FULLBSMTP" rather than the usual LISTSERV defaults. For more
information about subscription options, send a "QUERY DESIGN-L" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]).
Contributions sent to this list are automatically archived. You can get a list
of the available archive files by sending an "INDEX DESIGN-L" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]). You can then order these
files with a "GET DESIGN-L LOGxxxx" command, or using LISTSERV's database
search facilities. Send an "INFO DATABASE" command for more information on the
latter.
Please note that it is presently possible for other people to determine that
you are signed up to the list through the use of the "REVIEW" command, which
returns the e-mail address and name of all the subscribers. If you do not want
your name to be visible, just issue a "SET DESIGN-L CONCEAL" command.
More information on LISTSERV commands can be found in the LISTSERV reference
card, which you can retrieve by sending an "INFO REFCARD" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]).
* * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * *
* Teresa Hueg
* 1035 Van Slyke Ave
* St. Paul, MN 55103-1039
* (612)487-1609
* (hueg0001@xxxxxxxxxxxxxxx)
* University of MN - College of Architecture and Landscape Architecture
* 89 Church St., S.E.
* Minneapolis, MN 55455
* * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * *
Everyone should get this info when they subscribe, I did. Anyway, good
luck in all of your future endeavors, etc. etc.
You may leave the list at any time by sending a "SIGNOFF DESIGN-L" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]). You can also tell LISTSERV
how you want it to confirm the receipt of messages you send to the list. If you
do not trust the system, send a "SET DESIGN-L REPRO" command and LISTSERV will
send you a copy of your own messages, so that you can see that the message was
distributed and did not get damaged on the way. After a while you may find that
this is getting annoying, especially if your mail program does not tell you
that the message is from you when it informs you that new mail has arrived from
DESIGN-L. If you send a "SET DESIGN-L ACK NOREPRO" command, LISTSERV will mail
you a short acknowledgement instead, which will look different in your mailbox
directory. With most mail programs you will know immediately that this is an
acknowledgement you can read later. Finally, you can turn off acknowledgements
completely with "SET DESIGN-L NOACK NOREPRO".
Following instructions from the list owner, your subscription options have been
set to "FULLBSMTP" rather than the usual LISTSERV defaults. For more
information about subscription options, send a "QUERY DESIGN-L" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]).
Contributions sent to this list are automatically archived. You can get a list
of the available archive files by sending an "INDEX DESIGN-L" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]). You can then order these
files with a "GET DESIGN-L LOGxxxx" command, or using LISTSERV's database
search facilities. Send an "INFO DATABASE" command for more information on the
latter.
Please note that it is presently possible for other people to determine that
you are signed up to the list through the use of the "REVIEW" command, which
returns the e-mail address and name of all the subscribers. If you do not want
your name to be visible, just issue a "SET DESIGN-L CONCEAL" command.
More information on LISTSERV commands can be found in the LISTSERV reference
card, which you can retrieve by sending an "INFO REFCARD" command to
LISTSERV@xxxxxxxxxxxxx (or [email protected]).
* * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * *
* Teresa Hueg
* 1035 Van Slyke Ave
* St. Paul, MN 55103-1039
* (612)487-1609
* (hueg0001@xxxxxxxxxxxxxxx)
* University of MN - College of Architecture and Landscape Architecture
* 89 Church St., S.E.
* Minneapolis, MN 55455
* * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * *